Our references include top global and local customers

With comparable conditions (distance between press/quench and cooling table), we achieve the highest extrusion-speeds for a flying saw-cut compared to any competitor.

Our new generation of grippers (since 2024) no longer require compressed air and are therefore pleasantly quiet. We have also significantly increased all speeds/movements - making the gripper much more efficient for the operators.

This so far largest But-Shear is a further development of our currently sold 24 (by 2019) separating devices.

High performance, sedate running as well as special transport system

... as well as intermediate storage-transport and intermediate storage-feeding at ALCAN.

Chain conveyor and Log Feed to the log storage.

This quite fast working hot-shear allows a very late shearing (more time for heat up). Of course also this – preferred vertical – design is equipped with divided shearing- and clamping shells.

A Double Puller with additional flying saw (at the same time with an additional Puller). In connection with the double puller it is possible to substantially reduce the waste rate and increase at the same time the productivity.

This dismantling press has a press force of 1,200 kN and is designed for die holders with a diameter of up to 700 mm and a height up to 350 mm. (Tools of a 55 MN extrusion line.)

Highly modern intensive cooling: Atomised Water-Spray-Cooling for Gutmann AG (Weißenburg, Germany) in combination with the REISCH Double Puller and Flying Saw. REISCH also supplied for this modern intensive cooling system, an extension for the complete water treatment and ventilation.

HYDRO Aluminium Hungary – a renowned supplier for premium automobile manufacturers worldwide, has once more chosen us as their partner. We were commissioned to produce a highly modern Single Puller with Saw for a 60 MN extrusion press.

This grab has been specially designed for skips. The gripper stands out particularly through it’s proven and yet simple mechanics. In addition it can be controlled electro-mechanically over the cranes own control system. No profiles are ever damaged when the grab sits down on the skips.

Complete changeover from one way carton spacers to aluminium spacers: The aluminium extrusion factory ALCAN in Landau (D) changed over with the assistance of REISCH as a partner its complete production. All the factory systems as well as the necessary modification components were commissioned by REISCH within the appointed deadline.

... for PURSO OY Extrusions, Finland

High performance, sedate running as well as special transport system

This around 6m long combination profile-cooling is the ideal access in case high cooling-ratios are requested. This quench can be operated either with high air-speeds (adjustable up to 40 m/sec) or with compressed air (up to 10 bar and up to 120m³/h)

This Tool Dismantling Press has been specially designed and manufactured for various tool ring diameters (various sized extrusion presses). They are located mostly in a central die shop and have many years of service.

Further speciality of this system: An integrated, exceedingly comfortable and economical half automatic strapping unit at the end of the packing system.

The ideal table position increases the packing performance and speed. Additionally the packing container can be easily loaded and removed. The freedom of movement of the operators is completely optimised and in no way impaired.

Combination of the Baff Shear and/or the universal Dismantling Press combined with the Tool Gripper (Hammerer Aluminium 2011). For example: Tools (Dies, Tool Rings, Tool Sets) up to Ø 475mm or others.

The shown aluminium log storage has a capacity of 100, 8” logs with a length of 7 meters. In addition cut logs with a rest length of up to 1.2 meters can be automatically returned and stored.

Shear force 1500 kN und others, extremely solid machine body; robust dimensioned guides, solid pin stop, pin return slide, integrated feed and pin extraction transport.

A specially manufactured machine according to customer requirements: Shear force 1.000kN, Tool Ø 175 – 450mm, Die Height 30 – 300mm

... with Adoption Table, for large dies.

The REISCH developed and designed double puller: impressive through its simplicity and reliability. Solid, elastic guide rollers with long wheelbase, running on flat, twist and bending free carriageway. The distance between the supports is roughly six meters. The projecting puller head with lamella allows for feeding in the saw or shear.

Optimisation of the complete process cycle time of a profile stacker: An old, semi-automatic intermediate spacer-feeder was completely replaced.

This tool-gripper with a net-weight of around 460kg was specially developed for the tools of a 55MN extrusion press (Thöni Industriebetriebe in Tirol). These tool-sets have a diameter of up to 700mm and a height/length of up to 350mm.

Linking together baff-shear – tool dismantling-press – universal tool-gripper round

The HAI Group develops into the technology leader for aluminum components for the transport sector. Lightweight components for e-mobility are increasingly in demand. On this two identical 60MN extrusion-lines highly complex aluminium profiles with outstanding crash properties for all well-known OEMs in Europe are produced.

We supplied various system components for an existing 22 MN extrusion line in Denmark.

The development history of this billet loader further underlines the high flexibility of our company: Through the tight confirmed deadline, it was possible that REISCH could win the contract and the highly demanding project was indeed completed within the deadline.

The here shown example of three packing lines create together with the previous skip handling system and the individually integrated stackers a perfect, highly efficient and comfortable packing line for aluminium profiles.

Baff Shear with a shear force of 800kN or other: Automatic adjustable table height, fast strokes - forwards and backwards, safe and simple operation.

We have developed the latest, more massive version of our driven lifting roller-table for heavy and large profiles.

... can also be used instead of the freely positional Hot Saw. It is possible to fully automatically cut sample profile with these 2 saw blades during normal production operation.

Combination of the Baff Shear and/or the universal Dismantling Press combined with the Tool Gripper (Hammerer Aluminium 2011). For example: Tools (Dies, Tool Rings, Tool Sets) up to Ø 475mm or others.

The three axle crane can be controlled by using the REISCH Tool Gripper control system. Diameters for example of up to 600mm and tool heights of up to 350mm are possible and more.

Driven run out roller table – lifting roller sector with side guide rollers for a 25 MN press in Finland. Further lifting roller tables have been supplied by REISCH for Hydro-Bellenberg (22 MN) or Interfer Aluminium (22 MN) – each in addition to a REISCH Double Puller with Flying Saw.

At the push of a button, this media dispenser delivers either one of the 5 freely selectable packaging materials (paper or foil) from the roll-magazine or one of the 2 endless cartons.

Driven run out roller table – lifting roller sector with side guide rollers for a 25 MN press in Finland.

The log ramp and handling feed were fitted in front of the hall in order to completely remove the stacking operation from the production hall.

The newly designed log-shear with a cutting force of 170 tons divides 8 meter long aluminium logs playfully into the desired billets.